Ps3 break 1.1 upgradeable! - New version

This is the upgradeable version of ps3 break. Beware of imitation ps3 break that cannot upgrade..
Price : RM150
Shipping Free (registered Mail) or RM8 for pos laju..
as advertise at mudah.com.my : http://www.mudah.my/vi/7246248.htm

Step By Step Creating your personal game manager

It’s always said that there is never going to be a way to hack the most secure console of PlayStation 3. Here comes a new hack which is able to run games on PS3 without having the need to insert the original disc. This is achieved by a special “USB modchip” drive which allows you to dump your games from original discs to internal or external drive connected to PS3. This amazing USB modchip is called “PS3-Break”

What is PS3-Break?
 The PS3Break is a USB plug and play Modchip that installs in seconds, keeping your valid warranty seal in tact. It’s compatible with all PS3 models FAT and SLIM and supports all games and all regions: USA, JAP, PAL and KOREA
The Feature:
l Easy to use, just Plug and Play
l Totally solderless installation, no need to open up your console
l Keeping your PS3 console with valid warranty seal in tact
l Compatible with all PS3 models FAT and SLIM, and all Regions
l Plugs into the front of your PS3 console that will then un-lock your console to be able to play un-signed homebrew applications
l Allow you to make backups of your original games onto your hard drive
The chip is totally firmware upgradeable
How it works

Follow the complete step by step guide posted below to MAKE your PlayStation 3 enable you to create backups of original discs:
Pre-requisites are as follows:
l Any (FAT or SLIM) PlayStation 3 Console running firmware 3.41 or above.
l PS3-Break USB Modchip
l An external USB drive formatted to FAT32 with the “Backup Manager” file on it which you can download from www.ps3breakstore.com.
l Original disc of any PS3 game which you want to backup.



Step 1: Power off your console and make sure that there isn’t any disc in the Blu-ray drive.
For the SLIM Model: Remove the power chord before plugging in the USB.
For the FAT model: Turn off the power switch found at the backside of the console.
Step 2: Now insert the USB based PS3-Break Modchip to any USB port of your choice on the console. Once the USB is in place, Power ON the console and immediately press the “Eject” button. There should now be two LEDs turned-on on the USB as the console is loading.

If the LED light on the USB turns green, you are good to go as the PS3-Break has been successfully loaded.

If the LED turns red, then it means that the PS3-Break Modchip didn’t load successfully. This usually happens when the Power and Eject button sequence wasn’t performed properly. Start from Step 1 again if you end up having the red light.

Step 3: Once the console has finished booting up with the PS3-Break Modchip, plug-in the external USB storage device which has the "Backup Manager" setup to the console’s USB port.
Step 4: Now navigate to the "Game Menu" and select the option "Install Package Files" and then select "manager.pkg" file. This will basically install the “Backup Manager” application that you download earlier to your hard drive

Step 5: When the "manager.pkg" file is done loading, scroll all the way down in the “Game Menu” and there you should see a new application called "Backup Manager", run it.

Step 6: Now we’re in the Backup Manager app. Insert the game in the console’s optical drive which you want to backup. Press “O” and you will be asked where to make the backup, on the internal HDD or the external storage source connected via USB. This process is further elaborated by the following screenshots.

Step 7: In order to play a game via the backup you just made, insert any original game disc into your console (To emulate the loading process), run "Backup Manager" in the "Game Menu". Press “X” to play the selected backup game.

Step 8: Now you will be taken back to the main menu. In the "Game Menu" you will see the game which you have backed up. Now you can select the game, and run it without having the disc in the console’s drive.

Oh and you must make sure that the PS3-Break USB Modchip is connected to your console at all the times when you are playing the games via backups.

ps3 break :the coolest invention for ps3

ps3 break :the coolest invention for ps3

 

PS3 is the only major game console for keeping its golden and pivotal status hasn’t been broken till now. 

Although the cracking sound that winds its way constantly, which can never showed any sign of further move or step in breaking since PS3 swept the world over four years ago.

Now,it's become a history when PS Jailbreak comes out.But we now recommend this PS3 Break for you as a alternative for PS Jailbreak.

The same function,faster reading speed,cheaper price,upgradeable.

Note:

1)Make sure your console version is 3.41.

2)Product is in full stock with lowest price you can find.

3)You can find PS3 Break How-to-Install Video ,read FAQ about PS3 Break ,download PS3 Break User Guide here.

4)News about PS3 3.50 Firmware and PS3 dongle on Sep 20th.

5)We will ship out the newest version 1.1 PS3 Break released on Sep 27, 2010

6)The PS3 break v1.1 will have a Truth Inquiry sticker.You can scrape coating and check if it is original product from the official site.(Sep 27,2010)

PS3 Break Features:

1、Upgradeable hardware firmware thoroughly!

2、 The key “Upgrade” for software upgrading and avoids to be blocked by SONY. Users can also upgrade the updated software through computer.

3、Reading speed will be 2 times faster and it makes users to play more smoothly.

4、 Games can be copied and saved to internal or external hard disk, in this way, the expensive blue-ray driver and disc can be abandoned.

5、Plug & play USB port, the installation will be finished in a few seconds.

6、Homebrew software is supported.

7、Simple and clear illustrations will guide you to install step by step.

8、PS3 Break is compatible with all fat and slim model.

Package include:

1* PS3 Break V1.1 Modchip

 

Buy Now

FAQ: ps3 break

Q: Is PS3break easy to install?

A: Yes, it is a groundbreaking plug & play solution. It can be fully installed in seconds, without modifying or opening your console.

Q:Does it permanently modify my console?

A:Certainly not, once the PS3break is removed, it is completely disabled.

Q:What is the warranty?

A:PS3break is sold with a 1 year warranty. All our resellers will take care of warranty issues.

Q: Why it is said an unknow USB device was found in the menu when I connect the PS3break with PS3. In addition, the dongle’s green light isn’t lighting. ?

A： Reffering to this message, it means the dongle doesn’t work normally. You need to check the following operations:

1. All external USB devices should be removed(including the USB cable to the controller) from the PS3 machine before the PS3 is started up.

2. Ensure the disc dive of the PS3 is empty

3. Ensure the PS3 system firmware is V3.41

4. On the preconditon as the above mentioned. Do as following:

(1) It’s important to make sure the power was cut off.

(2) Insert the PS3break dongle to the PS3 device.
(3) connect the power jack with PS3 device to enter its ready mode.
(4) Power on the console and press the Eject button very quick. The green light of the dongle will be flashing shortly after a sound beep from the console
(5) Once the sytem menu is appeared on the screen, the green light will switch on, which indicating the dongle works well. If not, you need to repeat this process.

Q: why the “manager.pkg ” file wasn’t appeared when I executed Install Package Files in the menu ?

A: Reffering to this problem, please sovle it as the following steps: 1. Ensure the dongle green light is switched on. If not, please refer to FAQ 1.

2. To ensure a copy of Backup Manager (manager.pkg) file in FAT32 format is copied on it. And it’s stored in the root volumn of the external USB storage. Otherwise, if it will be failure.

3. With the above 2 conditions are fulfilled, intert the external USB storage, choose “Install Package Files”, the “manager pkg” will come up，then choose and execute it.

Q：when I came back to the Games menu, to choose “Backup Manager”, the joystick of the controller refused to work, and cannot choose the files in the menu ?

A: After you choosing “Backup Manager” ，you may choose the games, delete some files or backup files,etc by using the cross-shaped control keys on the left of the joystick

Q: After I finished the backup of the file, I chose the game in “Backup Manager”menu, and execute “load”, an error message appeared, “please insert the original BD game disc”. Why ?

A: To load up the game, a leading disc is needed for loading the PS3 games by inserting any original BD game disc into the drive of the PS3

Q:When I loaded the created backup game, it was back to Games menu, the game
what I wanted hasn’t been loaded. What’s the reason ?

A: It’s normal, When you came back to Games menu, you may find the just created backup games was above the icon of “Backup Manager”. Choose and execute it.

PS3 Break in stock PS3 dongle

PS3 Break,the second PS3 dongle that can backup your games to external HDD is now in stock.As Sony have updated 3.42 firmware for PS3 to block those UBS devices,we are highly recommend you not to update it or connect to PSN until the PS3 Break team find out the solution.

Ready Stock:
PS3 Break with free-shipping: RM150
We accept maybank2u and paypal
Ship worldwide.

ps3 break - Now you cn play download ps3 games

ps3 break - Now you cn play download ps3 games

The PS3 Break Modchip is currently the only Modchip on the market for the PS3 and it allows for instant gameplay of backed up games. Whether you choose to backup games onto your PS3 or onto an external hard drive, be sure they will work anytime and anywhere when using the one and only PS3 Break Modchip.

The PS3 Break Modchip is also the only Modchip that is fully USB and follows an easy to use, plug and play, installation process, do it yourself in a matter of minutes.